- New: avoid selecting WinPE editions by default (as is the case with ESDs from Microsoft) (SkipWinPeEditions=1)
- Updated: translations
- Fixed: selection of builds newer than 25163 which are not supported
- Fixed: website address
- Fixed: loading images with one or more unsupported editions results in wrong index being selected
- Improved: application logging
- New: basic wizard mode (only the required options are shown by default)
- New: run a custom script before the installation is finished
- New: more config parameters (skip wizard pages, copy boot package directories)
- New: options in the Advanced tab of the Configuration page can be saved
- Improved: application logging
- New: Malay translation
- Updated: translations
- Fixed: missing drive model prevents the disks list from being loaded
- Removed: warnings on disk 0
- Fixed: diskpart might fail to convert the boot partition to ESP
- Updated: translations
- Fixed: the WinRE image can't be mounted on removable disks
- New: flash the taskbar button and play a system sound when the installation process is finished
- New: temporarily disable autorun dialogs ("You need to format the disk...")
- Updated: translations
- Fixed: bcdboot/bcdedit can't be found on ARM64 builds of Windows with x64 emulation
- Fixed: cannot mount the WinRE image if the tool is on a network share or non-NTFS drive
- Fixed: the disk is converted to GPT twice if the MSR partition doesn't exist
- Removed: support for ARM32
- Removed: all references to Windows 10
- New: Finnish translation
- Updated: Traditional Chinese translation
- Improved: exception handling
- Fixed: the unwanted MSR partition may not be deleted in some cases
- Updated: Simplified Chinese translation
- Fixed: diskpart may refuse to convert the disk to GPT
- New: support for the Windows Recovery Environment (enabled by default along with GPT)
- New: mention Raspberry Pi 400 as a supported target and remove the Experimental flag
- Updated: translations
- Improved: exception handling
- Improved: application logging
- Improved: setup progress reporting
- Fixed: GPT disks are not being properly partitioned
- Fixed: no warning is shown if the local packages couldn't be updated
- Fixed: image mounting error message is ambiguous (replaced with a more user-friendly one)
- Removed: support for Windows builds older than 19041 on the Raspberry Pi 4 and 18362 on the Raspberry Pi 3 (ARM64)
- Updated: German translation
- Updated: Dutch translation
- Updated: Polish translation
- Updated: Slovak translation
- Updated: Serbian translation
- Updated: Swedish translation
- Updated: Russian translation
- Updated: Korean translation
- Updated: Japanese translation
- Updated: Simplified Chinese translation
- Updated: Traditional Chinese translation
- Improved: UI elements
- Improved: exception handling
- Improved: application logging
- Fixed: error while loading an image on some versions of Windows
- New: redesigned user interface
- New: high-DPI scaling
- New: re-enabled GPT support on Raspberry Pi 4
- New: additional config parameters (DismPath, MinDiskSizeCompression, MinDiskSizeFullInstall)
- New: mention Raspberry Pi 2 rev 1.2 as a supported ARM64 target
- Updated: translations
- Updated: 3rd party libraries
- Improved: UI elements
- Improved: locale detection
- Improved: exception handling
- Improved: language file structure
- Improved: application logging (logs are now stored in a separate directory)
- Fixed: the partition scheme can be changed on a FFU image
- Fixed: installation fails when using GPT-partitioned FFU images
- Fixed: disk 0 is hidden (it's not always the main drive)
- Fixed: wrong UI size when the OS language is set to Korean
- Removed: support for Windows builds older than 17763 on the Raspberry Pi 3 (deprecated UEFI)
- Removed: default RAM limit on Raspberry Pi 4
- See the pre-releases below for a complete changelog of version 2.0.0
- New: drag and drop support for the required binaries
- New: option to enable/disable the Windows Recovery Environment (it's disabled by default now)
- New: "reset to defaults" button on the Configuration page
- New: warning messages are shown when performing actions that could break the installation or make the device malfunction
- New: moved the Memory limit setting to a separate Advanced tab on the Configuration page
- Updated: German translation
- Updated: Traditional Chinese translation
- Updated: Polish translation
- Updated: Turkish translation
- Improved: language file structure
- Fixed: ISO image is not unmounted in some cases
- Removed: support for raw UEFI firmware images (only ZIP packages are allowed now)
- New: experimental ARM32 support (Raspberry Pi 2 and 3)
- Updated: Polish translation
- Fixed: missing translation on the Select Image page
- Fixed: FFU metadata parsing bug
- Fixed: minor UI bugs
- Removed: GPT support for the Pi 4 (until the bootloader will natively support it)
- New: experimental Raspberry Pi 4 support
- New: support for the upstream UEFI (available on Windows builds >= 17763)
- New: patch the GPT disk using raw disk access (drop dd, etcher_cli, GPT.img)
- New: moved the drivers package to Github
- Updated: 3rd party libraries
- Updated: Italian translation
- Updated: Traditional Chinese translation
- Updated: Korean translation
- Improved: exception handling
- Improved: language file structure
- Fixed: crash due to unhandled exception in the Process wrapper
- Fixed: opening two instances at the same time will break the application
- Fixed: minor user interface bugs
- New: Portuguese translation
- Updated: Korean translation
- Updated: Ukrainian translation
- Updated: Simplified Chinese translation
- Updated: Hungarian translation
- Updated: Czech translation
- Fixed: detection of compact FFU images
- Updated: Ukrainian translation
- Fixed: some background processes may leak if the program is force closed during the installation
- Fixed: standard FFU images (created for 16 GB or larger disks) can be installed on devices with less space (resulting in a failure later in the process)
- New: support for Windows Full Flash Update (FFU) images
- Updated: 3rd party libraries
- Updated: Simplified Chinese translation
- Updated: Ukrainian translation
- Improved: user interface
- Fixed: the logger window can't be re-opened when closed from the taskbar
- New: automatically download the required binaries (drivers package and UEFI)
- Updated: German translation
- Updated: Simplified Chinese translation
- Fixed: ESD image support regression
- Fixed: the main window can't be minimized using the taskbar
- New: etcher-cli support for flashing the GPT image
- New: re-enabled the GPT partition scheme on ARM64 machines
- Fixed: minor configuration bug
- New: partial Windows 10 ARM64 support (the GPT partition scheme is disabled)
- New: check for updates on startup
- New: "Copy to clipboard" button on the Logs window
- New: 64-bit support
- Updated: English translation
- Updated: Romanian translation
- Improved: application logging
- New: detect system locale and change the default language accordingly
- New: Ukrainian translation
- Updated: Czech translation
- Updated: German translation
- Improved: language file structure
- Improved: user interface
- New: Traditional Chinese translation
- New: French translation
- Updated: Russian translation
- Updated: German translation
- Updated: Czech translation
- Fixed: some translated strings don't fit into the buttons/warning note box
- Fixed: the info box on the progress page is still visible if the installation fails
- Fixed: encoding inconsistency (Korean / Japanese translations)
- Updated: Simplified Chinese translation (thanks @nyaruko)
- Updated: Russian translation (thanks @beeoss)
- New: support for the new device drivers (USB and Ethernet)
- Fixed: the info text box on the setup overview page can be selected
- Fixed: the name of the windows (MainWindow, LoggerWindow...) is not updated
- Updated: the note on the image selection page
- Updated: Polish translation (thanks @Gotard)
- Removed: USB-related warning notes
- New: Windows Imaging/wimlib progress reporting
- New: report the installation progress to the Windows taskbar
- New: option to select the Windows edition to be installed
- New: warning message when attempting to close the program while an operation is in progress
- New: directly use the WIM/ESD file from a mounted ISO image
- New: option to restart the installation process if it fails
- New: white Welcome page image & custom icon/logo
- New: redesigned "Installation overview" page
- New: About window
- New: added the following translations:
- Improved: application logging
- Improved: exception handling
- Fixed: installation of non-ARM64 Windows builds is allowed
- Fixed: graphics flicker when starting the program
- Fixed: selection of the first storage drive (Disk 0) is allowed
- Fixed: some UI elements (info text boxes) can be selected and the blinking cursor becomes visible
- Fixed: the UI freezes when the list of disks is loading or when the installation process begins
- New: added the following translations:
- Fixed: the program crashes on 32-bit builds of Windows when using wimlib-imagex
- New: support for ESD images
- New: Hungarian translation (thanks @Googulator)
- Fixed: DISM fails to add the drivers from the temporary path
- New: added the following translations:
- Fixed: DISM/wimlib fails when a path has spaces
- Fixed: sometimes the temporary folder is not entirely deleted on exit
- New: support for 8GB SD cards (using wimlib-imagex LZX compression)
- New: added the following translations:
- Improved: exception handling
- Fixed: Windows first boot error on a MBR disk
- Fixed: the boot files are downloaded every time an UEFI firmware is selected
- Fixed: "Save this configuration on exit" switch issue