If I kill the app & re-mount the USB drive, all is fine. Is the source code available so I can debug it?

Tried three different USB drives - always hangs at driver load. Set up custom DISM got to the FAILURE message. Last run log attached

When trying to start up the OS on the Raspberry Pi without a mouse (or I’m assuming any peripherals as well) plugged in, the boot up screen will simple show “Error: Could not”. To fix, just plug in a mouse. This should fix the issue, and it should boot up immediately.

Error: Could not, Raspberry Pi 4, Windows 11

Boot up a Raspberry Pi without any peripherals, and it should show “Error: Could not”. Plug in a mouse and wait a few seconds and it should boot up as normal.

Hi,

If I understand it, the internal WI-Fi does not work in the RPi4b due to the fact that there is no compatible driver for Windows 10 with ARM64.

I thought I would solve this problem with via USB Wi-Fi adapter. Which always works for me on all WIndows 10 (x64).

AWUS036ACM https://www.alfa.com.tw/products/awus036acm = Chipset MT7612U
AWUS036ACHM https://www.alfa.com.tw/products/awus036achm = Chipset MT7610U

Unfortunately, my (Windows 10 ARM64) does not recognize any of these USB Wi-Fi adapters, I only see it in the device list as unknown "USB\VID_0E8D&PID_7612&REV_0100"

Is there any way to get these adapters to work?
Thanks.

I've tried several versions of windows 10 and 11 for my raspberry PI 3 B v1.2 and this error message always appears. Does anyone know how to resolve?

no description provided

worproject.ml -> worproject.com

The link for the bug tracker on the worproject's contact page points to https://www.worproject.ml/bugtracker and should point to https://www.worproject.com/bugtracker.
Thanks for the project.

2022-12-02 13:44:59.4900 [info] Windows on Raspberry 64-bit (version 2.3.0)
2022-12-02 13:44:59.5481 [info] Copyright © 2018-2022 Mario Bălănică. All Rights Reserved.
2022-12-02 13:44:59.5481 [info] OS: Windows 10 Pro ver 2009 (19041.1.amd64fre.vb_release.191206-1406)
2022-12-02 13:44:59.5481 [info] OS language: pl-PL
2022-12-02 13:44:59.6901 [debug] Loaded configuration file:
2022-12-02 13:44:59.6901 [debug] WizardBasicMode: 0
2022-12-02 13:44:59.7200 [debug] SaveConfigOnExit: 0
2022-12-02 13:44:59.8257 [info] Loaded language: pl-PL
2022-12-02 13:44:59.9388 [warn] pl-PL translation is outdated!
2022-12-02 13:44:59.9388 [info] Checking for updates...
2022-12-02 13:45:00.3258 [warn] Couldn't obtain the version number from the server!
2022-12-02 13:45:02.8240 [info] Loading disks...
2022-12-02 13:45:03.0558 [info] Disk 1 - SDHC Card - Removable Media - 29 GB
2022-12-02 13:45:03.0667 [info] Disk 0 - Micron 2210S NVMe 512GB - Fixed hard disk media - 476 GB
2022-12-02 13:45:03.0667 [info] 2 disk(s) found
2022-12-02 13:45:04.2677 [info] Selected device: Raspberry Pi 4 / 400 [ARM64]
2022-12-02 13:45:07.6635 [info] Selected disk: Disk 1 - SDHC Card - Removable Media - 29 GB
2022-12-02 13:49:04.5000 [info] Selected image (ESD): 19045.2006.220908-0225.22h2_release_svc_refresh_CLIENTCONSUMER_RET_A64FRE_en-us.esd
2022-12-02 13:49:04.6559 [info] Edition 1: Windows Setup Media build 0.0
2022-12-02 13:49:04.6559 [info] Edition 2: Microsoft Windows PE (arm64) build 19041.2006
2022-12-02 13:49:04.6559 [info] Edition 3: Microsoft Windows Setup (arm64) build 19041.2006
2022-12-02 13:49:04.6559 [info] Edition 4: Windows 10 Home build 19041.2006
2022-12-02 13:49:04.6559 [info] Edition 5: Windows 10 Home Single Language build 19041.2006
2022-12-02 13:49:04.6699 [info] Edition 6: Windows 10 Pro build 19041.2006
2022-12-02 13:49:04.6699 [info] Selected edition: Microsoft Windows PE (arm64) build 19041.2006
2022-12-02 13:49:06.9153 [info] Selected edition: Microsoft Windows PE (arm64) build 19041.2006
2022-12-02 13:49:09.6316 [info] Drivers package source: server
2022-12-02 13:49:09.6316 [info] Drivers package remote repository: worproject/RPi-Windows-Drivers
2022-12-02 13:49:09.7194 [debug] Verifying the local asset...
2022-12-02 13:49:09.7194 [debug] Local asset ID: "64789089"
2022-12-02 13:49:09.7360 [debug] Getting the latest release from "worproject/RPi-Windows-Drivers"
2022-12-02 13:49:10.3689 [debug] Release name: "Version 0.17", ID: "66296007"
2022-12-02 13:49:10.3689 [debug] Getting the latest asset from release "66296007"
2022-12-02 13:49:10.3689 [debug] Asset name filter: "RPi4_Windows_ARM64"
2022-12-02 13:49:10.3689 [debug] Asset name: "RPi4_Windows_ARM64_Drivers_v0.17.zip", ID: "64789089"
2022-12-02 13:49:10.3729 [debug] The local asset is up-to-date!
2022-12-02 13:49:12.4010 [info] UEFI package source: server
2022-12-02 13:49:12.4149 [info] UEFI package remote repository: pftf/RPi4
2022-12-02 13:49:12.4779 [debug] Verifying the local asset...
2022-12-02 13:49:12.4779 [debug] Local asset ID: "58816125"
2022-12-02 13:49:12.4779 [debug] Getting the latest release from "pftf/RPi4"
2022-12-02 13:49:12.8943 [debug] Release name: "v1.33", ID: "61174834"
2022-12-02 13:49:12.8943 [debug] Getting the latest asset from release "61174834"
2022-12-02 13:49:12.8943 [debug] Asset name: "RPi4_UEFI_Firmware_v1.33.zip", ID: "58816125"
2022-12-02 13:49:12.8943 [debug] The local asset is up-to-date!
2022-12-02 13:49:33.5906 [info] -- Installation details --
2022-12-02 13:49:33.5916 [info] Disk
2022-12-02 13:49:33.5916 [info] Index: 1
2022-12-02 13:49:33.5916 [info] Name: SDHC Card
2022-12-02 13:49:33.5916 [info] Type: Removable Media
2022-12-02 13:49:33.5916 [info] Size: 29
2022-12-02 13:49:33.5916 [info] Device
2022-12-02 13:49:33.5916 [info] Type: RPi4-ARM64
2022-12-02 13:49:33.6075 [info] Image
2022-12-02 13:49:33.6075 [info] Format: ESD
2022-12-02 13:49:33.6075 [info] Index: 1
2022-12-02 13:49:33.6075 [info] Name: Windows Setup Media
2022-12-02 13:49:33.6075 [info] Arch: x86
2022-12-02 13:49:33.6075 [info] Build: 0.0
2022-12-02 13:49:33.6075 [info] Drivers package
2022-12-02 13:49:33.6075 [info] FilePath: worproject/RPi-Windows-Drivers
2022-12-02 13:49:33.6075 [info] ExtractedPath: C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\res\drivers\RPi4-ARM64
2022-12-02 13:49:33.6075 [info] UEFI package
2022-12-02 13:49:33.6235 [info] FilePath: pftf/RPi4
2022-12-02 13:49:33.6487 [info] ExtractedPath: C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\res\bootpackage\RPi4-ARM64
2022-12-02 13:49:33.6487 [info] Options
2022-12-02 13:49:33.6547 [info] UseLZXCompression: False
2022-12-02 13:49:33.6547 [info] PartitionScheme: GPT
2022-12-02 13:49:33.6547 [info] ImageDeployer: WIMGAPI
2022-12-02 13:49:33.6547 [info] MemoryLimit: 0
2022-12-02 13:49:33.6547 [info] RecoveryEnabled: True
2022-12-02 13:49:33.6547 [info] Boot config
2022-12-02 13:49:33.6547 [info] Path: C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\res\bootpackage\RPi4-ARM64_wor_boot_config.txt
2022-12-02 13:49:33.6547 [info] Contents:
2022-12-02 13:49:33.6697 [info] arm_64bit=1
2022-12-02 13:49:33.6697 [info] enable_uart=1
2022-12-02 13:49:33.6697 [info] uart_2ndstage=1
2022-12-02 13:49:33.6697 [info] enable_gic=1
2022-12-02 13:49:33.6936 [info] armstub=RPI_EFI.fd
2022-12-02 13:49:33.6936 [info] disable_commandline_tags=1
2022-12-02 13:49:33.6936 [info] disable_overscan=1
2022-12-02 13:49:33.6936 [info] device_tree_address=0x1f0000
2022-12-02 13:49:33.6936 [info] device_tree_end=0x200000
2022-12-02 13:49:33.7016 [info] dtoverlay=miniuart-bt
2022-12-02 13:49:33.7016 [info] dtoverlay=upstream-pi4
2022-12-02 13:49:33.7016 [info]
2022-12-02 13:49:33.7016 [info] CompressionRequired: False
2022-12-02 13:49:33.7016 [info] -- End of installation details --
2022-12-02 13:49:33.7016 [info] The installation process has started!
2022-12-02 13:49:33.7206 [info] Disabling autorun (Windows format dialogs)...
2022-12-02 13:49:33.7425 [debug] Getting the NoDriveTypeAutoRun policy...
2022-12-02 13:49:33.7425 [debug] NoDriveTypeAutoRun policy value: null
2022-12-02 13:49:33.7506 [debug] Setting the NoDriveTypeAutoRun policy to: 255
2022-12-02 13:49:33.7506 [debug] Policy set successfully!
2022-12-02 13:49:33.7506 [info] Autorun disabled!
2022-12-02 13:49:33.7506 [info] Allocated partition letters:
2022-12-02 13:49:33.7506 [info] Windows partition: V
2022-12-02 13:49:33.7645 [info] Boot partition: W
2022-12-02 13:49:33.7645 [info] Formatting the target device...
2022-12-02 13:49:33.7825 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2022-12-02 13:49:33.7825 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\temp\diskpart.script"
2022-12-02 13:49:36.4298 [debug] diskpart.exe process output:
2022-12-02 13:49:36.4298 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.964

Copyright (C) Microsoft Corporation.
On computer: NB001

Disk 1 is now the selected disk.

DiskPart has encountered an error: Odmowa dost©pu.
See the System Event Log for more information.

2022-12-02 13:49:36.4298 [warn] Exit code: -2147024891
2022-12-02 13:49:36.4370 [warn] Diskpart retry attempt 1/4 failed!
2022-12-02 13:49:36.4370 [warn] Retrying... (3.5s delay)
2022-12-02 13:49:39.9570 [info] Formatting the target device...
2022-12-02 13:49:39.9570 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2022-12-02 13:49:39.9740 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\temp\diskpart.script"
2022-12-02 13:49:41.8227 [debug] diskpart.exe process output:
2022-12-02 13:49:41.8227 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.964

Copyright (C) Microsoft Corporation.
On computer: NB001

Disk 1 is now the selected disk.

DiskPart has encountered an error: Odmowa dost©pu.
See the System Event Log for more information.

2022-12-02 13:49:41.8227 [warn] Exit code: -2147024891
2022-12-02 13:49:41.8516 [warn] Diskpart retry attempt 2/4 failed!
2022-12-02 13:49:41.8516 [warn] Retrying... (3.5s delay)
2022-12-02 13:49:45.3704 [info] Formatting the target device...
2022-12-02 13:49:45.3740 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2022-12-02 13:49:45.3740 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\temp\diskpart.script"
2022-12-02 13:49:47.4396 [debug] diskpart.exe process output:
2022-12-02 13:49:47.4396 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.964

Copyright (C) Microsoft Corporation.
On computer: NB001

Disk 1 is now the selected disk.

DiskPart has encountered an error: Odmowa dost©pu.
See the System Event Log for more information.

2022-12-02 13:49:47.4396 [warn] Exit code: -2147024891
2022-12-02 13:49:47.4396 [warn] Diskpart retry attempt 3/4 failed!
2022-12-02 13:49:47.4396 [warn] Retrying... (3.5s delay)
2022-12-02 13:49:50.9685 [info] Formatting the target device...
2022-12-02 13:49:50.9685 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2022-12-02 13:49:50.9904 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\temp\diskpart.script"
2022-12-02 13:49:54.4715 [debug] diskpart.exe process output:
2022-12-02 13:49:54.4715 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.964

Copyright (C) Microsoft Corporation.
On computer: NB001

Disk 1 is now the selected disk.

DiskPart has encountered an error: Odmowa dost©pu.
See the System Event Log for more information.

2022-12-02 13:49:54.4715 [warn] Exit code: -2147024891
2022-12-02 13:49:54.4844 [warn] Diskpart retry attempt 4/4 failed!
2022-12-02 13:49:54.4844 [error] Aborting...
2022-12-02 13:49:54.5293 [error] WoR.Exceptions.ProcessException: The diskpart.exe process has returned an error!
w WoR.Setup.SetupProcess.<RunDiskpartTaskWithRetry>d22.MoveNext()
--- Koniec śladu stosu z poprzedniej lokalizacji, w której wystąpił wyjątek ---
w System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
w System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
w WoR.Setup.SetupProcess.<Run>d20.MoveNext()
2022-12-02 13:49:54.5672 [info] Restoring autorun...
2022-12-02 13:49:54.6289 [debug] Setting the NoDriveTypeAutoRun policy to: null
2022-12-02 13:49:54.7989 [debug] Policy set successfully!
2022-12-02 13:49:54.9163 [info] Autorun restored!
2022-12-02 13:49:54.9498 [warn] The installation could not be finished!
2022-12-02 13:49:55.0387 [info] Elapsed time: 00:00:21
2022-12-02 13:50:15.5847 [info] Selected edition: Windows 10 Pro build 19041.2006
2022-12-02 13:50:23.2218 [info] -- Installation details --
2022-12-02 13:50:23.2374 [info] Disk
2022-12-02 13:50:23.2374 [info] Index: 1
2022-12-02 13:50:23.2374 [info] Name: SDHC Card
2022-12-02 13:50:23.2374 [info] Type: Removable Media
2022-12-02 13:50:23.2486 [info] Size: 29
2022-12-02 13:50:23.2486 [info] Device
2022-12-02 13:50:23.2486 [info] Type: RPi4-ARM64
2022-12-02 13:50:23.2673 [info] Image
2022-12-02 13:50:23.2673 [info] Format: ESD
2022-12-02 13:50:23.2673 [info] Index: 5
2022-12-02 13:50:23.2673 [info] Name: Windows 10 Home Single Language
2022-12-02 13:50:23.2673 [info] Arch: ARM64
2022-12-02 13:50:23.2790 [info] Build: 19041.2006
2022-12-02 13:50:23.2968 [info] Drivers package
2022-12-02 13:50:23.2968 [info] FilePath: worproject/RPi-Windows-Drivers
2022-12-02 13:50:23.2968 [info] ExtractedPath: C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\res\drivers\RPi4-ARM64
2022-12-02 13:50:23.2968 [info] UEFI package
2022-12-02 13:50:23.2968 [info] FilePath: pftf/RPi4
2022-12-02 13:50:23.2968 [info] ExtractedPath: C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\res\bootpackage\RPi4-ARM64
2022-12-02 13:50:23.3120 [info] Options
2022-12-02 13:50:23.3278 [info] UseLZXCompression: False
2022-12-02 13:50:23.3278 [info] PartitionScheme: GPT
2022-12-02 13:50:23.3278 [info] ImageDeployer: WIMGAPI
2022-12-02 13:50:23.3278 [info] MemoryLimit: 0
2022-12-02 13:50:23.3278 [info] RecoveryEnabled: True
2022-12-02 13:50:23.3418 [info] Boot config
2022-12-02 13:50:23.3734 [info] Path: C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\res\bootpackage\RPi4-ARM64_wor_boot_config.txt
2022-12-02 13:50:23.3734 [info] Contents:
2022-12-02 13:50:23.3734 [info] arm_64bit=1
2022-12-02 13:50:23.3734 [info] enable_uart=1
2022-12-02 13:50:23.3734 [info] uart_2ndstage=1
2022-12-02 13:50:23.3911 [info] enable_gic=1
2022-12-02 13:50:23.4189 [info] armstub=RPI_EFI.fd
2022-12-02 13:50:23.4209 [info] disable_commandline_tags=1
2022-12-02 13:50:23.4209 [info] disable_overscan=1
2022-12-02 13:50:23.4209 [info] device_tree_address=0x1f0000
2022-12-02 13:50:23.4209 [info] device_tree_end=0x200000
2022-12-02 13:50:23.4209 [info] dtoverlay=miniuart-bt
2022-12-02 13:50:23.4489 [info] dtoverlay=upstream-pi4
2022-12-02 13:50:23.4509 [info]
2022-12-02 13:50:23.4509 [info] CompressionRequired: False
2022-12-02 13:50:23.4509 [info] -- End of installation details --
2022-12-02 13:50:23.4509 [info] The installation process has started!
2022-12-02 13:50:23.4787 [info] Disabling autorun (Windows format dialogs)...
2022-12-02 13:50:23.4787 [debug] Getting the NoDriveTypeAutoRun policy...
2022-12-02 13:50:23.4826 [debug] NoDriveTypeAutoRun policy value: null
2022-12-02 13:50:23.4826 [debug] Setting the NoDriveTypeAutoRun policy to: 255
2022-12-02 13:50:23.4826 [debug] Policy set successfully!
2022-12-02 13:50:23.4826 [info] Autorun disabled!
2022-12-02 13:50:23.5086 [info] Allocated partition letters:
2022-12-02 13:50:23.5086 [info] Windows partition: N
2022-12-02 13:50:23.5146 [info] Boot partition: O
2022-12-02 13:50:23.5146 [info] Formatting the target device...
2022-12-02 13:50:23.5146 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2022-12-02 13:50:23.5146 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\temp\diskpart.script"
2022-12-02 13:50:25.7477 [debug] diskpart.exe process output:
2022-12-02 13:50:25.7477 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.964

Copyright (C) Microsoft Corporation.
On computer: NB001

Disk 1 is now the selected disk.

DiskPart has encountered an error: Odmowa dost©pu.
See the System Event Log for more information.

2022-12-02 13:50:25.7477 [warn] Exit code: -2147024891
2022-12-02 13:50:25.7477 [warn] Diskpart retry attempt 1/4 failed!
2022-12-02 13:50:25.7659 [warn] Retrying... (3.5s delay)
2022-12-02 13:50:29.3014 [info] Formatting the target device...
2022-12-02 13:50:29.3014 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2022-12-02 13:50:29.3129 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\temp\diskpart.script"
2022-12-02 13:50:31.0926 [debug] diskpart.exe process output:
2022-12-02 13:50:31.0926 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.964

Copyright (C) Microsoft Corporation.
On computer: NB001

Disk 1 is now the selected disk.

DiskPart has encountered an error: Odmowa dost©pu.
See the System Event Log for more information.

2022-12-02 13:50:31.0926 [warn] Exit code: -2147024891
2022-12-02 13:50:31.1115 [warn] Diskpart retry attempt 2/4 failed!
2022-12-02 13:50:31.1115 [warn] Retrying... (3.5s delay)
2022-12-02 13:50:34.6191 [info] Formatting the target device...
2022-12-02 13:50:34.6191 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2022-12-02 13:50:34.6500 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\temp\diskpart.script"
2022-12-02 13:50:36.5336 [debug] diskpart.exe process output:
2022-12-02 13:50:36.5336 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.964

Copyright (C) Microsoft Corporation.
On computer: NB001

Disk 1 is now the selected disk.

DiskPart has encountered an error: Odmowa dost©pu.
See the System Event Log for more information.

2022-12-02 13:50:36.5336 [warn] Exit code: -2147024891
2022-12-02 13:50:36.5336 [warn] Diskpart retry attempt 3/4 failed!
2022-12-02 13:50:36.5456 [warn] Retrying... (3.5s delay)
2022-12-02 13:50:40.0517 [info] Formatting the target device...
2022-12-02 13:50:40.0517 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2022-12-02 13:50:40.0692 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\pzwirko\Downloads\WoR_Release_2.3.0\temp\diskpart.script"
2022-12-02 13:50:41.8707 [debug] diskpart.exe process output:
2022-12-02 13:50:41.8707 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.964

Copyright (C) Microsoft Corporation.
On computer: NB001

Disk 1 is now the selected disk.

DiskPart has encountered an error: Odmowa dost©pu.
See the System Event Log for more information.

2022-12-02 13:50:41.8764 [warn] Exit code: -2147024891
2022-12-02 13:50:41.8954 [warn] Diskpart retry attempt 4/4 failed!
2022-12-02 13:50:41.8954 [error] Aborting...
2022-12-02 13:50:41.8954 [error] WoR.Exceptions.ProcessException: The diskpart.exe process has returned an error!
w WoR.Setup.SetupProcess.<RunDiskpartTaskWithRetry>d22.MoveNext()
--- Koniec śladu stosu z poprzedniej lokalizacji, w której wystąpił wyjątek ---
w System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
w System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
w WoR.Setup.SetupProcess.<Run>d20.MoveNext()
2022-12-02 13:50:41.9053 [info] Restoring autorun...
2022-12-02 13:50:41.9272 [debug] Setting the NoDriveTypeAutoRun policy to: null
2022-12-02 13:50:41.9272 [debug] Policy set successfully!
2022-12-02 13:50:41.9372 [info] Autorun restored!
2022-12-02 13:50:41.9372 [warn] The installation could not be finished!
2022-12-02 13:50:41.9522 [info] Elapsed time: 00:00:18

Something on your PC is interfering with the installation, probably an anti-virus.

no description provided

no description provided

no description provided

no description provided

This mode will only show options that are really necessary: disk, device model and image.

Select Language step works fine as well as selecting target machine. The product throws an error on the screen when it attempts to detect storage devices. I have tried multiple USB devices including SD cards, USB keys, and USB attached SSD drives. All failed at this step
The error displayed in the pop up window is "System.NullReferenceException: Object reference not set to an instance of an object". Clearing the error and attempting to re-scan storage devices doesn't help, it throws the same error.

Start program
Select Language and target machine
Attempt to select storage media and the program throws the error described above.

Log content follows:
2021-11-25 09:29:39.7698 [info] Windows on Raspberry 64-bit (version 2.2.2)
2021-11-25 09:29:39.8091 [info] Copyright © 2018-2021 Mario Balanica. All Rights Reserved.
2021-11-25 09:29:39.8091 [info] OS: Windows 10 Pro ver 2009 (19041.1.amd64fre.vb_release.191206-1406)
2021-11-25 09:29:39.8091 [info] OS language: en-US
2021-11-25 09:29:40.1836 [info] Loaded language: en-US
2021-11-25 09:29:40.2474 [info] Checking for updates...
2021-11-25 09:29:40.8458 [info] No updates found.
2021-11-25 09:29:42.6079 [info] Loading disks...
2021-11-25 09:29:42.7162 [error] System.NullReferenceException: Object reference not set to an instance of an object.
at WoR.Utils.DiskUtils.<>c__DisplayClass0_0.<GetDisksList>b0()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Utils.DiskUtils.<GetDisksList>d0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Pages.SelectDevicePage.<LoadDisks>d__9.MoveNext()

Can you post a screenshot of all the drives shown in Disk Management?

Here's the drive list. Drive H: is the target, but still stuck

It's caused by the RAM disk. What software are you using for it? I can't reproduce this issue with ImDisk or SoftPerfect RAM Disk.

DataRAM RamDiskVE

Thanks, it has been fixed in the next version.

Disk 2 is now the selected disk.

Partition 1 is now the selected partition.

DiskPart successfully removed the drive letter or mount point.

The selected volume or partition is in use.
To continue with the operation use the OVERRIDE parameter.

Should mount it in the user's temp directory then.
Or I can just ditch DISM's mount functionality completely and use apply & capture like in WoR-PE instead.

no description provided

Fixed. The WinRE image will be now mounted in the Windows partition of the target disk.

no description provided

no description provided

no description provided

Log:

2021-06-30 21:14:55.9946 [info] Windows on Raspberry 64-bit (version 2.1.2)
2021-06-30 21:14:56.2198 [info] Copyright © 2018-2021 Mario Bălănică. All Rights Reserved.
2021-06-30 21:14:56.2328 [info] OS: Windows 10 Pro ver 2009 (21390.1.arm64fre.co_release.210521-1658)
2021-06-30 21:14:56.2328 [info] OS language: de-DE
2021-06-30 21:14:56.2328 [debug] ARM64 machine detected!
2021-06-30 21:14:56.9609 [info] Loaded language: de-DE
2021-06-30 21:14:57.0081 [warn] de-DE translation is outdated!
2021-06-30 21:14:57.1021 [info] Checking for updates...
2021-06-30 21:14:58.8146 [info] No updates found.
2021-06-30 21:15:03.7044 [info] Loading disks...
2021-06-30 21:15:04.3041 [info] Disk 1 - AMicro AM8180 NVME SCSI Disk Device - External hard disk media - 465 GB
2021-06-30 21:15:04.3041 [info] ⚠ Disk 0 - Windows 10 - Fixed hard disk media - 255 GB
2021-06-30 21:15:04.3197 [info] 2 disk(s) found
2021-06-30 21:15:13.9680 [info] Selected device: Raspberry Pi 2/3 [ARM32]
2021-06-30 21:15:14.5615 [info] Selected device: Raspberry Pi 4 / 400 [ARM64]
2021-06-30 21:15:18.8494 [info] Selected disk: Disk 1 - AMicro AM8180 NVME SCSI Disk Device - External hard disk media - 465 GB
2021-06-30 21:15:28.7223 [info] Selected image (ISO): 21390.2025.210527-1818.CO_RELEASE_SVC_IM_CLIENTMULTICOMBINED_UUP_A64FRE_DE-DE.ISO
2021-06-30 21:15:29.1424 [info] Mounting the ISO image...
2021-06-30 21:15:42.0674 [info] ISO file mounted on: E:\
2021-06-30 21:15:42.0808 [info] Found WIM image: E:\sources\install.wim
2021-06-30 21:15:42.2622 [info] Edition 1: Windows 10 Home build 21390.1
2021-06-30 21:15:42.2622 [info] Edition 2: Windows 10 Home Single Language build 21390.1
2021-06-30 21:15:42.2767 [info] Selected edition: Windows 10 Home build 21390.1
2021-06-30 21:15:51.5888 [info] Drivers package source: server
2021-06-30 21:15:51.6049 [info] Drivers package remote repository: worproject/RPi-Windows-Drivers
2021-06-30 21:15:52.0473 [debug] Verifying the local asset...
2021-06-30 21:15:52.0639 [debug] Local asset ID: "34732105"
2021-06-30 21:15:52.1103 [debug] Getting the latest release from "worproject/RPi-Windows-Drivers"
2021-06-30 21:15:52.8015 [debug] Release name: "Version 0.9", ID: "41207938"
2021-06-30 21:15:52.8110 [debug] Getting the latest asset from release "41207938"
2021-06-30 21:15:52.8110 [debug] Asset name filter: "RPi4_Windows_ARM64"
2021-06-30 21:15:52.8110 [debug] Asset name: "RPi4_Windows_ARM64_Drivers_v0.9.zip", ID: "34732105"
2021-06-30 21:15:52.8110 [debug] The local asset is up-to-date!
2021-06-30 21:15:55.6217 [info] UEFI package source: server
2021-06-30 21:15:55.6513 [info] UEFI package remote repository: pftf/RPi4
2021-06-30 21:15:56.0089 [debug] Verifying the local asset...
2021-06-30 21:15:56.0246 [debug] Local asset ID: "38693583"
2021-06-30 21:15:56.0246 [debug] Getting the latest release from "pftf/RPi4"
2021-06-30 21:15:56.0558 [debug] Release name: "v1.28", ID: "44741398"
2021-06-30 21:15:56.0558 [debug] Getting the latest asset from release "44741398"
2021-06-30 21:15:56.0558 [debug] Asset name: "RPi4_UEFI_Firmware_v1.28.zip", ID: "38693583"
2021-06-30 21:15:56.0558 [debug] The local asset is up-to-date!
2021-06-30 21:16:16.5558 [info] -- Installation details --
2021-06-30 21:16:16.5749 [info] Disk
2021-06-30 21:16:16.5749 [info] Index: 1
2021-06-30 21:16:16.6058 [info] Name: AMicro AM8180 NVME SCSI Disk Device
2021-06-30 21:16:16.6373 [info] Type: External hard disk media
2021-06-30 21:16:16.6684 [info] Size: 465
2021-06-30 21:16:16.6684 [info] Device
2021-06-30 21:16:16.6811 [info] Type: RPi4-ARM64
2021-06-30 21:16:16.6811 [info] Image
2021-06-30 21:16:16.6979 [info] Format: ISO
2021-06-30 21:16:16.7142 [info] Index: 1
2021-06-30 21:16:16.7142 [info] Name: Windows 10 Home
2021-06-30 21:16:16.7467 [info] Arch: ARM64
2021-06-30 21:16:16.7777 [info] Build: 21390.1
2021-06-30 21:16:16.8092 [info] Drivers package
2021-06-30 21:16:16.8092 [info] FilePath: worproject/RPi-Windows-Drivers
2021-06-30 21:16:16.8406 [info] ExtractedPath: C:\WIN\wor\res\drivers\RPi4-ARM64
2021-06-30 21:16:16.8406 [info] UEFI package
2021-06-30 21:16:16.8718 [info] FilePath: pftf/RPi4
2021-06-30 21:16:16.9028 [info] ExtractedPath: C:\WIN\wor\res\bootpackage\RPi4-ARM64
2021-06-30 21:16:16.9028 [info] Options
2021-06-30 21:16:16.9344 [info] UseLZXCompression: False
2021-06-30 21:16:16.9656 [info] PartitionScheme: GPT
2021-06-30 21:16:16.9656 [info] ImageDeployer: WIMGAPI
2021-06-30 21:16:16.9777 [info] MemoryLimit: 0
2021-06-30 21:16:16.9957 [info] RecoveryEnabled: True
2021-06-30 21:16:17.0278 [info] Boot config
2021-06-30 21:16:17.0591 [info] Path: C:\WIN\wor\res\bootpackage\RPi4-ARM64_wor_boot_config.txt
2021-06-30 21:16:17.0904 [info] Contents:
2021-06-30 21:16:17.1027 [info] arm_64bit=1
2021-06-30 21:16:17.1196 [info] enable_uart=1
2021-06-30 21:16:17.1196 [info] uart_2ndstage=1
2021-06-30 21:16:17.1196 [info] enable_gic=1
2021-06-30 21:16:17.1525 [info] armstub=RPI_EFI.fd
2021-06-30 21:16:17.1841 [info] disable_commandline_tags=1
2021-06-30 21:16:17.2154 [info] disable_overscan=1
2021-06-30 21:16:17.2154 [info] device_tree_address=0x1f0000
2021-06-30 21:16:17.2441 [info] device_tree_end=0x200000
2021-06-30 21:16:17.2441 [info] dtoverlay=miniuart-bt
2021-06-30 21:16:17.2595 [info]
2021-06-30 21:16:17.2752 [info] CompressionRequired: False
2021-06-30 21:16:17.2752 [info] -- End of installation details --
2021-06-30 21:16:17.2905 [info] The installation process has started!
2021-06-30 21:16:17.2905 [info] Allocated partition letters:
2021-06-30 21:16:17.3217 [info] Windows partition: X
2021-06-30 21:16:17.3373 [info] Boot partition: Y
2021-06-30 21:16:17.3683 [info] Formatting the target device...
2021-06-30 21:16:17.3848 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2021-06-30 21:16:17.4152 [debug] Launch diskpart.exe with the following arguments: /s "C:\WIN\wor\temp\diskpart.script"
2021-06-30 21:16:19.2277 [debug] diskpart.exe process output:
2021-06-30 21:16:19.2277 [debug] Standard output:

Microsoft DiskPart-Version 10.0.21390.1

Copyright (C) Microsoft Corporation.
Auf Computer: MICHAELDREWC33F

Datentr„ger 1 ist jetzt der gew„hlte Datentr„ger.

Der Datentr„ger wurde bereinigt.

Datentr„gerpartitionierung wird beendet...

2021-06-30 21:16:19.2433 [debug] Exit code: 0
2021-06-30 21:16:22.7902 [info] The target device has been erased!
2021-06-30 21:16:22.7902 [info] Creating the partitions...
2021-06-30 21:16:22.8058 [debug] Creating diskpart script with the following commands: select disk 1 , convert mbr , convert gpt , list partition , exit
2021-06-30 21:16:22.8372 [debug] Launch diskpart.exe with the following arguments: /s "C:\WIN\wor\temp\diskpart.script"
2021-06-30 21:16:24.1339 [debug] diskpart.exe process output:
2021-06-30 21:16:24.1339 [debug] Standard output:

Microsoft DiskPart-Version 10.0.21390.1

Copyright (C) Microsoft Corporation.
Auf Computer: MICHAELDREWC33F

Datentr„ger 1 ist jetzt der gew„hlte Datentr„ger.

Der gew„hlte Datentr„ger wurde erfolgreich in MBR-Format konvertiert.

Der gew„hlte Datentr„ger wurde erfolgreich in GPT-Format konvertiert.

Partition ### Typ GrӇe Offset

Partition 1 Reserviert 15 MB 17 KB

Datentr„gerpartitionierung wird beendet...

2021-06-30 21:16:24.1339 [debug] Exit code: 0
2021-06-30 21:16:24.1496 [debug] Found unwanted MSR partition! Deleting...
2021-06-30 21:16:24.1658 [debug] Creating diskpart script with the following commands: select disk 1 , select partition 1 , delete partition override , exit
2021-06-30 21:16:24.1658 [debug] Launch diskpart.exe with the following arguments: /s "C:\WIN\wor\temp\diskpart.script"
2021-06-30 21:16:25.3840 [debug] diskpart.exe process output:
2021-06-30 21:16:25.3840 [debug] Standard output:

Microsoft DiskPart-Version 10.0.21390.1

Copyright (C) Microsoft Corporation.
Auf Computer: MICHAELDREWC33F

Datentr„ger 1 ist jetzt der gew„hlte Datentr„ger.

Partition 1 ist jetzt die gew„hlte Partition.

Die gew„hlte Partition wurde erfolgreich gel”scht.

Datentr„gerpartitionierung wird beendet...

2021-06-30 21:16:25.3840 [debug] Exit code: 0
2021-06-30 21:16:25.4171 [debug] Creating diskpart script with the following commands: select disk 1 , create partition primary size=128 , format fs=fat32 quick label=BOOT , assign letter=Y , create partition msr size=16 , create partition primary , format fs=ntfs quick label=Windows , assign letter=X , exit
2021-06-30 21:16:25.4328 [debug] Launch diskpart.exe with the following arguments: /s "C:\WIN\wor\temp\diskpart.script"
2021-06-30 21:16:28.9882 [debug] diskpart.exe process output:
2021-06-30 21:16:28.9967 [debug] Standard output:

Microsoft DiskPart-Version 10.0.21390.1

Copyright (C) Microsoft Corporation.
Auf Computer: MICHAELDREWC33F

Datentr„ger 1 ist jetzt der gew„hlte Datentr„ger.

Die angegebene Partition wurde erfolgreich erstellt.

0 Prozent bearbeitet

100 Prozent bearbeitet
DiskPart hat das Volume erfolgreich formatiert.

Der Laufwerkbuchstabe oder der Bereitstellungspunkt wurde zugewiesen.

Die angegebene Partition wurde erfolgreich erstellt.

Die angegebene Partition wurde erfolgreich erstellt.

0 Prozent bearbeitet
0 Prozent bearbeitet
0 Prozent bearbeitet
0 Prozent bearbeitet
0 Prozent bearbeitet

100 Prozent bearbeitet
DiskPart hat das Volume erfolgreich formatiert.

Der Laufwerkbuchstabe oder der Bereitstellungspunkt wurde zugewiesen.

Datentr„gerpartitionierung wird beendet...

2021-06-30 21:16:28.9967 [debug] Exit code: 0
2021-06-30 21:16:29.0444 [info] The partitions have been created!
2021-06-30 21:16:29.0575 [info] Applying the WIM image to: X
2021-06-30 21:16:29.0765 [trace] Started Windows Imaging
2021-06-30 21:20:22.4630 [trace] Windows Imaging finished the task successfully!
2021-06-30 21:20:22.4786 [info] The image has been applied to: X
2021-06-30 21:20:22.4949 [info] Installing drivers into the base image...
2021-06-30 21:20:29.4310 [info] Finding WinRE image...
2021-06-30 21:20:29.4625 [info] Found image at: X:\Windows\System32\Recovery\winre.wim
2021-06-30 21:20:29.4799 [info] Mounting the image at: C:\WIN\wor\temp\winre
2021-06-30 21:20:34.6990 [info] Installing drivers into the WinRE image...
2021-06-30 21:20:37.0678 [info] Unmounting the image and saving the changes...
2021-06-30 21:20:45.4689 [info] The drivers have been installed!
2021-06-30 21:20:45.4850 [info] Installing the boot files on: Y
2021-06-30 21:20:45.6251 [info] The boot files have been copied to: Y
2021-06-30 21:20:45.6420 [info] Creating the BCD...
2021-06-30 21:20:45.6753 [debug] Launch bcdboot.exe with the following arguments: X:\Windows /s Y: /f UEFI
2021-06-30 21:20:45.7082 [error] System.ComponentModel.Win32Exception (0x80004005): Das System kann die angegebene Datei nicht finden
at System.Diagnostics.Process.StartWithCreateProcess(ProcessStartInfo startInfo)
at WoR.Wrappers.ProcessWrapper.<ExecuteAsync>b__21_0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Wrappers.ProcessWrapper.<ExecuteAsync>d21.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Wrappers.BCDBootWrapper.<Run>d0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Wrappers.BCDBootWrapper.<CreateBCD>d1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Setup.SetupProcess.<CreateAndConfigureBCDTask>d34.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Setup.SetupProcess.<Run>d__17.MoveNext()
2021-06-30 21:20:45.7883 [warn] The installation could not be finished!
2021-06-30 21:20:45.7883 [info] Elapsed time: 00:04:28

• Download ISO using utility in the guide
• Open WoR
• Select ISO and storage.
• use default settings and the latest firmware and packages from the servers.
• start Installation

• i'm using the latest version of Windows 10 ARM inside Parallels on my M1 Macbook Pro
• Crashed after driver installation

Thanks for reporting this issue!
It's fixed in the upcoming version.

no description provided

Log as below:

2021-05-10 00:49:51.2358 [info] Windows on Raspberry 64-bit (version 2.1.2)
2021-05-10 00:49:51.2818 [info] Copyright © 2018-2021 Mario Bălănică. All Rights Reserved.
2021-05-10 00:49:51.2868 [info] OS: Windows 10 Home ver 2009 (19041.1.amd64fre.vb_release.191206-1406)
2021-05-10 00:49:51.2868 [info] OS language: en-US
2021-05-10 00:49:51.6458 [info] Deleting the temporary folder...
2021-05-10 00:49:51.8281 [info] Loaded language: en-US
2021-05-10 00:49:52.0259 [info] The temporary folder has been deleted!
2021-05-10 00:49:51.9131 [info] Checking for updates...
2021-05-10 00:49:53.4029 [info] Loading disks...
2021-05-10 00:49:53.5213 [info] No updates found.
2021-05-10 00:49:53.9972 [info] Disk 1 - SDHC Card - Removable Media - 14 GB
2021-05-10 00:49:53.9972 [info] ⚠ Disk 0 - WDC PC SN520 SDAPNUW-512G-1002 - Fixed hard disk media - 476 GB
2021-05-10 00:49:54.0213 [info] 2 disk(s) found
2021-05-10 00:49:55.2014 [info] Selected device: Raspberry Pi 2/3 [ARM64]
2021-05-10 00:49:58.6453 [info] Selected disk: Disk 1 - SDHC Card - Removable Media - 14 GB
2021-05-10 00:50:03.1827 [info] Selected image (ISO): 21376.1.210503-1432.CO_RELEASE_CLIENTMULTICOMBINED_UUP_A64FRE_EN-US.ISO
2021-05-10 00:50:03.2937 [info] Mounting the ISO image...
2021-05-10 00:50:07.9177 [info] ISO file mounted on: D:\
2021-05-10 00:50:07.9177 [info] Found WIM image: D:\sources\install.wim
2021-05-10 00:50:07.9938 [info] Edition 1: Windows 10 Home build 21376.1
2021-05-10 00:50:07.9938 [info] Edition 2: Windows 10 Home Single Language build 21376.1
2021-05-10 00:50:07.9938 [info] Selected edition: Windows 10 Home build 21376.1
2021-05-10 00:50:10.7944 [info] Drivers package source: server
2021-05-10 00:50:10.7944 [info] Drivers package remote repository: worproject/RPi-Windows-Drivers
2021-05-10 00:50:10.8511 [debug] Verifying the local asset...
2021-05-10 00:50:10.8511 [debug] Local asset ID: "34732102"
2021-05-10 00:50:10.9103 [debug] Getting the latest release from "worproject/RPi-Windows-Drivers"
2021-05-10 00:50:11.3652 [debug] Release name: "Version 0.9", ID: "41207938"
2021-05-10 00:50:11.3652 [debug] Getting the latest asset from release "41207938"
2021-05-10 00:50:11.3652 [debug] Asset name filter: "RPi3_Windows_ARM64"
2021-05-10 00:50:11.3652 [debug] Asset name: "RPi3_Windows_ARM64_Drivers_v0.9.zip", ID: "34732102"
2021-05-10 00:50:11.3652 [debug] The local asset is up-to-date!
2021-05-10 00:50:13.4016 [info] UEFI package source: server
2021-05-10 00:50:13.4016 [info] UEFI package remote repository: pftf/RPi3
2021-05-10 00:50:13.4650 [debug] Verifying the local asset...
2021-05-10 00:50:13.4650 [debug] Local asset ID: "35170496"
2021-05-10 00:50:13.4650 [debug] Getting the latest release from "pftf/RPi3"
2021-05-10 00:50:13.7103 [debug] Release name: "v1.34", ID: "41537804"
2021-05-10 00:50:13.7103 [debug] Getting the latest asset from release "41537804"
2021-05-10 00:50:13.7103 [debug] Asset name: "RPi3_UEFI_Firmware_v1.34.zip", ID: "35170496"
2021-05-10 00:50:13.7103 [debug] The local asset is up-to-date!
2021-05-10 00:50:21.4833 [info] -- Installation details --
2021-05-10 00:50:21.4833 [info] Disk
2021-05-10 00:50:21.4833 [info] Index: 1
2021-05-10 00:50:21.4833 [info] Name: SDHC Card
2021-05-10 00:50:21.4912 [info] Type: Removable Media
2021-05-10 00:50:21.4912 [info] Size: 14
2021-05-10 00:50:21.4912 [info] Device
2021-05-10 00:50:21.4912 [info] Type: RPi3-ARM64
2021-05-10 00:50:21.4912 [info] Image
2021-05-10 00:50:21.4912 [info] Format: ISO
2021-05-10 00:50:21.4912 [info] Index: 1
2021-05-10 00:50:21.5063 [info] Name: Windows 10 Home
2021-05-10 00:50:21.5063 [info] Arch: ARM64
2021-05-10 00:50:21.5063 [info] Build: 21376.1
2021-05-10 00:50:21.5063 [info] Drivers package
2021-05-10 00:50:21.5063 [info] FilePath: worproject/RPi-Windows-Drivers
2021-05-10 00:50:21.5063 [info] ExtractedPath: C:\Users\naruto\Downloads\raspberry\WoR_Release_2.1.2\res\drivers\RPi3-ARM64
2021-05-10 00:50:21.5063 [info] UEFI package
2021-05-10 00:50:21.5063 [info] FilePath: pftf/RPi3
2021-05-10 00:50:21.5063 [info] ExtractedPath: C:\Users\naruto\Downloads\raspberry\WoR_Release_2.1.2\res\bootpackage\RPi3-ARM64
2021-05-10 00:50:21.5063 [info] Options
2021-05-10 00:50:21.5063 [info] UseLZXCompression: False
2021-05-10 00:50:21.5063 [info] PartitionScheme: GPT
2021-05-10 00:50:21.5063 [info] ImageDeployer: WIMGAPI
2021-05-10 00:50:21.5063 [info] MemoryLimit: 0
2021-05-10 00:50:21.5063 [info] RecoveryEnabled: True
2021-05-10 00:50:21.5063 [info] Boot config
2021-05-10 00:50:21.5232 [info] Path: C:\Users\naruto\Downloads\raspberry\WoR_Release_2.1.2\res\bootpackage\RPi3-ARM64_wor_boot_config.txt
2021-05-10 00:50:21.5232 [info] Contents:
2021-05-10 00:50:21.5232 [info] arm_64bit=1
2021-05-10 00:50:21.5232 [info] disable_commandline_tags=2
2021-05-10 00:50:21.5232 [info] disable_overscan=1
2021-05-10 00:50:21.5232 [info] enable_uart=1
2021-05-10 00:50:21.5542 [info] uart_2ndstage=1
2021-05-10 00:50:21.5542 [info] armstub=RPI_EFI.fd
2021-05-10 00:50:21.5542 [info] device_tree_address=0x1f0000
2021-05-10 00:50:21.5542 [info] device_tree_end=0x200000
2021-05-10 00:50:21.5542 [info]
2021-05-10 00:50:21.5542 [info] CompressionRequired: False
2021-05-10 00:50:21.5542 [info] -- End of installation details --
2021-05-10 00:50:21.5542 [info] The installation process has started!
2021-05-10 00:50:21.5542 [info] Allocated partition letters:
2021-05-10 00:50:21.5542 [info] Windows partition: X
2021-05-10 00:50:21.5542 [info] Boot partition: Y
2021-05-10 00:50:21.5713 [info] Formatting the target device...
2021-05-10 00:50:21.5713 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2021-05-10 00:50:21.5713 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\naruto\Downloads\raspberry\WoR_Release_2.1.2\temp\diskpart.script"
2021-05-10 00:50:23.0073 [debug] diskpart.exe process output:
2021-05-10 00:50:23.0073 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.610

Copyright (C) Microsoft Corporation.
On computer: DESKTOP-0USA9FV

Disk 1 is now the selected disk.

DiskPart has encountered an error: The device is not ready.
See the System Event Log for more information.

2021-05-10 00:50:23.0073 [warn] Exit code: -2147024875
2021-05-10 00:50:23.0223 [warn] Diskpart retry attempt 1/4 failed!
2021-05-10 00:50:23.0223 [warn] Retrying... (3.5s delay)
2021-05-10 00:50:26.5356 [info] Formatting the target device...
2021-05-10 00:50:26.5398 [debug] Creating diskpart script with the following commands: select disk 1 , clean , exit
2021-05-10 00:50:26.5398 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\naruto\Downloads\raspberry\WoR_Release_2.1.2\temp\diskpart.script"
2021-05-10 00:50:28.5240 [debug] diskpart.exe process output:
2021-05-10 00:50:28.5240 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.610

Copyright (C) Microsoft Corporation.
On computer: DESKTOP-0USA9FV

Disk 1 is now the selected disk.

DiskPart succeeded in cleaning the disk.

Leaving DiskPart...

2021-05-10 00:50:28.5240 [debug] Exit code: 0
2021-05-10 00:50:32.0300 [info] The target device has been erased!
2021-05-10 00:50:32.0300 [info] Creating the partitions...
2021-05-10 00:50:32.0369 [debug] Creating diskpart script with the following commands: select disk 1 , convert mbr , convert gpt , list partition , exit
2021-05-10 00:50:32.0369 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\naruto\Downloads\raspberry\WoR_Release_2.1.2\temp\diskpart.script"
2021-05-10 00:50:33.4739 [debug] diskpart.exe process output:
2021-05-10 00:50:33.4749 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.610

Copyright (C) Microsoft Corporation.
On computer: DESKTOP-0USA9FV

Disk 1 is now the selected disk.

DiskPart successfully converted the selected disk to MBR format.

DiskPart successfully converted the selected disk to GPT format.

There are no partitions on this disk to show.

Leaving DiskPart...

2021-05-10 00:50:33.4749 [debug] Exit code: 0
2021-05-10 00:50:33.4749 [debug] Creating diskpart script with the following commands: select disk 1 , convert mbr , convert gpt , list partition , exit , exit
2021-05-10 00:50:33.4749 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\naruto\Downloads\raspberry\WoR_Release_2.1.2\temp\diskpart.script"
2021-05-10 00:50:34.9273 [debug] diskpart.exe process output:
2021-05-10 00:50:34.9283 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.610

Copyright (C) Microsoft Corporation.
On computer: DESKTOP-0USA9FV

Disk 1 is now the selected disk.

DiskPart successfully converted the selected disk to MBR format.

DiskPart successfully converted the selected disk to GPT format.

There are no partitions on this disk to show.

Leaving DiskPart...

2021-05-10 00:50:34.9283 [debug] Exit code: 0
2021-05-10 00:50:34.9526 [debug] Creating diskpart script with the following commands: select disk 1 , create partition primary size=128 , format fs=fat32 quick label=BOOT , assign letter=Y , create partition msr size=16 , create partition primary , format fs=ntfs quick label=Windows , assign letter=X , exit
2021-05-10 00:50:34.9526 [debug] Launch diskpart.exe with the following arguments: /s "C:\Users\naruto\Downloads\raspberry\WoR_Release_2.1.2\temp\diskpart.script"
2021-05-10 00:50:44.2519 [debug] diskpart.exe process output:
2021-05-10 00:50:44.2949 [debug] Standard output:

Microsoft DiskPart version 10.0.19041.610

Copyright (C) Microsoft Corporation.
On computer: DESKTOP-0USA9FV

Disk 1 is now the selected disk.

DiskPart succeeded in creating the specified partition.

0 percent completed
0 percent completed
0 percent completed

100 percent completed
DiskPart successfully formatted the volume.

DiskPart successfully assigned the drive letter or mount point.

DiskPart succeeded in creating the specified partition.

DiskPart succeeded in creating the specified partition.

0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed
0 percent completed

100 percent completed
DiskPart successfully formatted the volume.

DiskPart successfully assigned the drive letter or mount point.

Leaving DiskPart...

2021-05-10 00:50:44.2949 [debug] Exit code: 0
2021-05-10 00:50:44.3809 [info] The partitions have been created!
2021-05-10 00:50:44.3809 [info] Applying the VBR patch...
2021-05-10 00:50:44.3809 [error] System.UnauthorizedAccessException: Access to the path is denied.
at System.IO.Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.WriteCore(Byte[] buffer, Int32 offset, Int32 count)
at System.IO.FileStream.FlushWrite(Boolean calledFromFinalizer)
at System.IO.FileStream.Dispose(Boolean disposing)
at System.IO.Stream.Close()
at WoR.Utils.Filesystem.FirmwareGptHack.ApplyVbrPatch(Disk disk)
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Setup.SetupProcess.<ApplyGptWorkaroundTask>d22.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Setup.SetupProcess.<CleanDiskAndCreatePartitionsTask>d21.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at WoR.Setup.SetupProcess.<RunDiskpartTaskWithRetry>d19.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at WoR.Setup.SetupProcess.<Run>d__17.MoveNext()
2021-05-10 00:50:44.4159 [warn] The installation could not be finished!
2021-05-10 00:50:44.4159 [info] Elapsed time: 00:00:22

• Download ISO using utility in the guide
• Open WoR
• Select ISO and storage.
• With default settings and the latest firmware and packages selected.
• Start Installation

Crashes after "Applying vbr patch" with Access denied

I'm not able to reproduce this issue. Have you tried again? Rebooting the machine might also help.

Yes, tried after restart! Same result. The previous version of Windows 21370 or the previous version of WoR will make any difference?

Ok, it worked! Had to whitelist the app from protection as in the screenshot. Also, is this forum the right place to ask questions/queries?

It depends on the question. This is the place for issues related to the WoR imager tool.
Driver issues can be reported here: https://github.com/worproject/RPi-Windows-Drivers/issues
You can also join one of the community-made chat servers: https://worproject.ml/community
For other queries, we have a Contact form: https://worproject.ml/contact

WoR.exe fails to build USB drive (SSD) for use on RPi4. USB drive is 128GB. Have attached the log file from WoR.

I followed the steps in WoR to and received the error.

Formatted the USB and then attempted to build the drive again.

I turned off the virus protection and tried again. The process went further but still failed. I made a deliberate effort to not do anything (type on keyboard, move mouse) while the WoR process was building the disk and the errors still occurred. I have attached the error logs.

I just realized I was using a USB to Sata adapter that had given me a problem last year on a Pi4. So, I have ordered another adapter that is the same as the one currently on the Pi4 and does not have any problems.

Please put a hold on this report until I have had time to received and test the new adapter. It will be here on Friday and I should have a report on Saturday, 29 May.

Thank you.

Butch

The problem is resolved. I used a different USB to Sata Adapter which has the ASM1153E chip and was able to successfully build the drive.

Do not believe anyone who says all USB to Sata Adapters are equal. The ones with the ASM115E chip always word, other chips work sometimes but not all the time.

Butch

Log file here: https://www.worproject.ml/bugtracker/view.php?id=139#c254

Someone has posted this snippet from the log file:

Disk 6 is now the selected disk.

The disk you specified is not MBR formatted.
Please select an empty MBR disk to convert.

2021-04-27 16:25:45.3646 [warn] Exit code: -2147024809
2021-04-27 16:25:45.3866 [warn] Diskpart retry attempt 4/4 failed!
2021-04-27 16:25:45.3866 [error] Aborting...

The disk should be converted to MBR by the clean command, but it seems that's not always the case.
Fortunately, we can call the convert mbr command as many times as we want without diskpart complaining that "the specified disk is not GPT formatted" like it does when converting to GPT.

In UEFI mode, I disable the 3GB memory limit and then I add total_mem=4096 to config.txt, after a reboot the OS still sees the full 8GB as usable.
The reason I'm trying to limit memory is because in GPT mode with 8GB usable Windows crashes constantly. If I flash in MBR mode, no crashes but Windows doesn't see more than 4GB. I'd like to find a sweet spot where I can use GPT with more than 4GB without crashing.

Per Mario's recommendation, I've tried bcdedit "removememory" command but it doesn't work either. I'm stuck at Pi 3GB, 4GB in MBR mode with limit disable or the full 8GB usable in GPT mode with constant GSODs.

see description

https://github.com/pftf/RPi4/issues/145
https://www.raspberrypi.org/forums/viewtopic.php?f=28&amp;t=310025

You have problem X, but you're trying to solve problem Y. You shouldn't need to limit the RAM in the first place.

GPT support on USB drives isn't working properly at the moment (https://www.worproject.ml/bugtracker/view.php?id=137), so MBR is your only option.

If I flash in MBR mode, no crashes but Windows doesn't see more than 4GB.

Try a clean re-install with MBR (don't edit the config.txt file), then disable the 3 GB limit in UEFI and let it boot. Does it still see only 4 GB of RAM?

Good morning Mario and thanks for your prompt reply.
I didn't know there were issues with GPT/USB. In fact, at WoR discord I was advised to use GPT so the OS can be updated via WU.

I've tried countless times to flash with MBR without editing config.txt to no avail, the result is always the same, 8GB available but only 3.95GB usable.
I think I'm gonna buy a fast SDCard and put USB to rest until the issues are fixed.

Thanks again, you and the team are doing a great job, please keep up. Cheers!

That is weird. The partition scheme shouldn't affect the amount of available RAM.
It may be worth trying a non-insider build (like 19042).

I may release a new version of the imager that fixes the GPT issue this week.

Weird indeed.
Believe I've tried, most of the "countless" failed attempts were 1904x. They all work fine but not with the GPT/USB/8GB combination.
Great! thanks for letting me know, looking forward to test it.
Cheers!

Version 2.1.0 is now available: https://worproject.ml/downloads
Let me know if it fixes the issue.

Hi Mario,
Yes thanks! everything is working in GPT mode w/o crashes so far. Total_mem from advance menu @4096MB is working.
Where do I increase it to test the upper limit w/o crashing?
I can try MBR if needed for feedback purposes otherwise I'm happy as it is. LMK. Cheers!

So it still crashes with GPT and no memory limit? What's the stop code in the BSoD/GSoD?

No crashes. I flashed 19042.928 and successfully updated all the way up to 19043.962 without a single crash so far but I'd like to increase usable memory gradually to find out at which point the crashes would start again if any. Before I couldn't do that because I was limited to either 3GB (Pi limit) or 8GB (limit disable). I can't provide you with logs because I didn't keep copies of all those failed installations.
Is it possible to now increase the usable memory to a value higher that 4096MB without re-flashing?

Never mind, I found out that it can be done by using msconfig.
I can't believe is so simple, I never had the need to this before so I didn't know.

So far so good, no crashes even at full 8GB usable. I'm not sure what was causing all those GSODs before, I haven't changed anything else so it must've been the issue USB/GPT that you mentioned at the beginning.

Now that it is stable, Is time to start overclocking to see how far it will go. Thanks for everything. Cheers!

Good to hear that it works now!

I've built an image using UUPDump (Linux). Now I'm using WoR imager. When I drag the image to the imager (or select it through the file select modal), it shows "Mounting ISO Image..." for a couple of seconds then emits an obscure error:

Something went wrong...

Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index

Here's the trace from the logs:

2020-10-18 11:39:24.8306 [info] Selected image (ISO): Windows-19041-ARM64-en-us.iso
2020-10-18 11:39:24.9085 [info] Mounting the ISO image...
2020-10-18 11:39:26.4710 [error] System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
   at System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource)
   at System.Collections.Generic.List`1.get_Item(Int32 index)
   at WoR.Setup.Prerequisites.Image.<Mount>b__20_0()
   at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at WoR.Setup.Prerequisites.Image.<Mount>d__20.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
   at WoR.Pages.SelectImagePage.<LoadImageFromFile>d__12.MoveNext()

I haven't tried regenerating the image. It's conceivable that something is corrupted about the image.

Any advice before I start again from scratch?

The image is 3.84GB and mounts just fine in macOS.

I tried mounting the file on the Windows VM, however, and it was unable to mount the image because it was on the VM host. After copying the image file to the VM guest, the imager was able to use it.

Consider trapping this exception to replace it with a nicer error message.

Also, consider allowing the image to be mounted by the user. If I were able to mount the ISO into the Guest VM, that would have saved copying 3.8GB to the guest VM.

WoR relies on Windows to mount the image, so if you're not able to mount it manually then I can't do anything.

Also, consider allowing the image to be mounted by the user. If I were able to mount the ISO into the Guest VM, that would have saved copying 3.8GB to the guest VM.

If the ISO is already mounted, you can load the install.wim/.esd file from the sources folder.

Consider trapping this exception to replace it with a nicer error message.

I agree. This will be fixed in the next version.

That answers all my questions. Thanks!

no description provided

Fixed.
Also made GPT the default partition scheme, as it's required for WinRE to work.

• The VBR patch must not be applied on the Pi 4 (the bootloader now supports GPT natively).
• diskpart seems to create an additional MSR partition right at the beginning on recent builds of Windows, and the tool misinterprets it as the Boot partition, thus failing to assign the proper GUID.

no description provided

The app can now catch all diskpart errors. In addition to that, it will retry a few times in case of failure during the partitioning phase.

no description provided

no description provided

Tested again on build 21354 and it works fine without any changes.

USB 3.0 boot from an UASP drive fails with the INACCESSIBLE_BOOT_DEVICE BSoD.
This issue is caused by the rpiuxflt.sys filter driver, and until we find a proper fix for it, we can apply one the following workarounds:

• replace uaspstor.sys with USBSTOR.SYS in the Windows\System32\drivers directory. (this allows the usage of all the available RAM, but transfer speeds are limited due to removed UASP support and filter driver overhead)

• prevent the installation of the rpiuxflt.sys driver and create the following reg key: HKLM,System\CurrentControlSet\Control\Compatibility\Device\USBXHCI:ACPI!VEN_PNP&DEV_0D10,\ USBXHCI,0xB0001,0x70000000003 (this requires a 3 GB RAM limit, but transfer speeds greatly increase)

Fixed in the drivers repository: https://github.com/worproject/RPi-Windows-Drivers/releases/tag/v0.6

2020-10-08 12:04:38.6796 [info] Windows on Raspberry 64-bit (version 2.0.0)
2020-10-08 12:04:38.8266 [info] Copyright © 2018-2020 Mario Bălănică. All Rights Reserved.
2020-10-08 12:04:38.8346 [info] OS: Windows 10 Pro ver 2004 (19041.1.amd64fre.vb_release.191206-1406)
2020-10-08 12:04:39.1456 [info] Loaded language: tr-TR
2020-10-08 12:04:39.1846 [warn] tr-TR translation is outdated!
2020-10-08 12:04:39.3116 [info] Checking for updates...
2020-10-08 12:04:40.0351 [info] No updates found.
2020-10-08 12:04:41.9985 [info] Language changed to: en-US
2020-10-08 12:04:42.8145 [info] Loading disks...
2020-10-08 12:04:43.0365 [info] Disk 2 - SDHC Card - Removable Media - 28 GB
2020-10-08 12:04:43.0365 [info] ⚠ Disk 0 - KINGSTON SV300S37A120G - Fixed hard disk media - 111 GB
2020-10-08 12:04:43.0505 [info] 2 disk(s) found
2020-10-08 12:04:45.1475 [info] Selected disk: Disk 2 - SDHC Card - Removable Media - 28 GB
2020-10-08 12:04:46.0853 [info] Selected device: Raspberry Pi 4
2020-10-08 12:04:52.4275 [error] WoR.Exceptions.InvalidImageException: The selected file is not a valid Windows image!
konum: WoR.Pages.SelectImagePage.<LoadImageFromFile>d__12.MoveNext()

What image have you selected?

Nevermind, I've found the issue.

Fixed.

The WppRecorder.sys driver in 17763 causes bug checks on all platforms. (can be fixed by replacing it with a version from an older build, but it's not worth the hassle)

Also, the Ethernet controller driver for Pi 4 doesn't work on builds older than 19041.

We can add a config option to bypass this, if anyone still wants to use those builds and understands the limitations.

no description provided

Done.

no description provided.

Done.

It seems that disk 0 is not always the main drive.

Fixed.

WoR uses the deprecated RaspberryPiPkg UEFI to provide support for older builds.
It does work okay, but users have to set the boot order manually and they don't get the latest fixes available.

Done.

DISM may fail to service an image that's newer than it.
Users should be able to specify their own path to a newer version of DISM, or ideally the latest version should come bundled with WoR.

Added.

no description provided

Done.

no description provided

Partially fixed.
The app is now system DPI aware, meaning that it will scale correctly to the DPI of the primary monitor.
Moving the window to a monitor with a different DPI setting will still cause some blurriness.

https://github.com/raspberrypi/rpi-eeprom/issues/120
https://github.com/raspberrypi/rpi-eeprom/issues/126

The beta EEPROM bootloader released on 15.05.2020 introduced the following changes:

• superfloppy support when booting from a SD card (so our GPT hack works now :P)
• native GPT support when booting from USB (but not superfloppy)

Done.

no description provided

Done.

Diskpart fails to assign a letter to the boot partition.

Fixed.

no description provided

Fixed.

see the attached screenshot below

Fixed.

no description provided

Done.

no description provided

Added.

USB doesn't work here.
As far as I know we need a separate partition for this image to be useful, and we don't currently create one (because of space constraints on devices with 16 GB or less available space).

It might be re-enabled in the future, with proper support. But for now, it's useless and locks the system after a few failed boot attempts.

Added.
WinRE is disabled by default now.

no description provided

Added.

because I've seen people change the default 1 GB RAM limit on the Pi 4 and complain that USB-C doesn't work.

Done.

The app can download all the required files automatically, but it still allows the selection of custom binaries.
There's no easy way to verify if all these packages will work on the selected device, so we should add a warning for that.

Added.

no description provided

Done.

no description provided

Done.

• when the user changes the device type and the image is incompatible with it
• when the user loads another ISO image over the previously mounted one

Fixed.

The GPT hack that we're using seems to have no effect on the Pi 4, because the boot ROM now loads the bootcode from the built-in SPI EEPROM instead of looking for it on removable media.

So I think it should be disabled until native support for GPT is added in the bootcode (will that ever happen?), or maybe we can find another way of tricking the boot ROM into finding the ESP partition?

https://github.com/raspberrypi/rpi-eeprom/issues/120

GPT support is disabled for now on the Pi 4.

This even works on the Raspberry Pi 2 rev 1.1.
On the Pi 3 B all BSP drivers work, including the proprietary ones: touch panel (for the official RPi touch display??), WLAN and Bluetooth.

There's no x86 emulation layer unfortunately, and some things are broken.

Note: this won't work on the new Pi 4 without modifying the ms-iot UEFI.

Done.

When an image is selected the Status Bar displays "MISSING_STRING" for a short period of time.

Fixed.

no description provided

Done.

no description provided

Fixed.

no description provided

Fixed.

Things to consider:

• RAM must be limited to 1GB by using the "truncatememory" BCD option.
• some specific drivers must be removed from the drivers package.